Contact Pure Air Filtration
Municipal Odor Control
Pure Air's adsorbent media are especially effective at removing
odors common to waste water treatment facilities. Urban encroachment has
necessitated the use of Pure Air systems to capture these odors.
Industrial Electronics Corrosion Prevention
Heavy industry has relied on adsorbent technologies for over
thirty years. These customers know the industrial gases can cause rapid
failure of electronic control systems, resulting in downtime and costly
electronics replacement. Pure Air's solution
to this problem take advantage of our superior adsorbents and efficient
scrubber designs to provide our customers long lasting, effective
solutions.
Emergency Gas Removal
Pure Air provides systems to protect people in the event of a
leak in a storage tank of dangerous gases. These systems quickly adsorb
any of the toxic gases before harm can be
done. This is especially necessary at water treatment facilities where
large stocks of chlorine and sulfur dioxide are stored.
Pure Air’s dry scrubbing technology provides the customer with a
reliable, virtually maintenance-free system which is always ready.
Ethylene Control - Preserving Fruits & Vegetables
It is a proven fact that ethylene gas accelerates the ripening
process. Unfortunately, many fruits make their own ethylene – causing
premature ripening during storage or shipment.
Pure Air Filtration’s technology adsorbs ethylene gas, thereby
dramatically reducing the ripening process.
Commercial Solutions - Improving Indoor Air Quality
Indoor Air Quality concerns have become very common. "Sick
building syndrome" and other health concerns cause companies billions of
dollars each year in health related costs and lost productivity. Indoor
air pollution can be 100 times greater than the air outside.
Pure Air Filtration provides systems which remove gases, odors,
pollen, and dust from the air.
Residential Solutions - Improving Indoor Air Quality
The EPA has recently identified home indoor air quality as a
major risk, especially for those suffering from asthma and other
respiratory conditions. Using same technology
that we use in museums & hospitals, Pure Air has developed systems for
homes. Don’t be fooled by the claims from air filters purchased at
department stores. The only way to truly purify the air in your home is
to use Pure Air’s gas adsorbent technology, HEPA dust filtration, and UV
light to kill microbes. Our clients have
reported DRAMATIC improvements in their lives after installation of our
systems, including less trips to the doctor, better sleeps, and less
congestion.
Gas Adsorbent Media PureAir 4 The industry standard for general gas removal. This product uses a 4% permanganate impregnation. PureAir 8 A general adsorbent using 8% permanganate on an alumina matrix. PureAir HC The most adsorbent permanganate product available. CPS Blend
A blend of activated carbon and 8% permanganate adsorbents which provides a double effective general adsorbent. SafetysorbThis product specifically targets chlorine.
Ammoniasorb A blend of activated carbon and alumina with an acid impregnate. This product is specifically used to remove base gases such as ammonia and other amines.
PureAir AC Activated carbon for removal of organic gases. Sulphasorb A technically superior adsorbent for H2S removal.
Particulate
Filters
Particulate (dust) filters should be replaced whenever your media
is replaced as well as any time that they fill with dust with normal
use.Two types of particulate filters are necessary: Pre-filters and
Final Filters Pre-filters are used to prevent
normal ambient dust from collecting in the media adsorbent section.
Typical pre-filters are 30% efficient. Final
Filters are used to prevent dust from the adsorbent media section from
exiting the air purification system. Pure Air recommends a minimum 95%
efficient filter for this need. Pure Air can provide particulate filters
for all of your filtering needs.
Disposable Adsorbent Modules
PureAir Disposable modules offer our customers the convenience of
a disposable cartridge – greatly reducing air handler downtime, labor,
and mess. Pure Air has two types of modules
available: PK18 modules – 6"H x 24"W x 18"D,
in a two part cartridge. The modules are an affordable replacement to
Purafil PK-18 modules. Available with CPS
Blend media or PureAir 8 media. PK12 modules –
12"H x 12"W x 24"D, in a two part cartridge. These modules are an
affordable replacement to Purafil PK-12
modules. Available with CPS Blend media or PureAir 8 media. Available
with other media upon request.
Gas Adsorbent Filters
Pure Air provides a line of gas adsorbent filters which can be
used in place of normal particulate filters. Odor/vapor control is as
easy as removing your old filter and replacing them with Pure Air gas
adsorbent filters. Filters are provided in normal ASHRAE sizes in 2",
4", and 12" depths.
Scrubber Systems
Pure Air provides air purifiers customized for the individual
needs of our clients. Factors which we take
into consideration when providing these customized solutions include:
Contaminant load, necessary airflow, desired service life,
material of construction, available differential pressure, and ease of
service. The types of systems that Pure Air
can provide include: Side access housings,
deep bed scrubbers, compressor intake filters, positive pressurization
systems. Contact us to see how we can provide
a custom solution for you.